After several days of shack computer woes, I finally got back to building something. Or at least I thought I did. It seems like whatever I've been doing lately did not please the Radio Gods.
With the new shack PC in order, I decided to load up the CNC and carve out a couple of boards for good measure. Here lately, I'm working on breakout boards for the SBL-1 Mixer. No specific reason, but I obviously need more practice in the CAD/CAM arena. So, I set to drawing the layout, glancing at the datasheet for the mixer from time to time in order to make sure I had the right pins to the right input/output, etc. I saved the files, exported them to CAM, got the G-Code and saved the files to my drive. Then loaded them up on the CNC, probed a height map and started cutting. The cutting was going well, and "it's only a $4 piece of copper clad board", so I figured I'd run a few errands during the job.
Well, I definitely screwed that up.
The job was running fine. Of course, it was, computers and CNC machines do EXACTLY what you tell them to do. What I told mine to do was cut the pins/input outputs wrong. I had accidentally reversed them in the design. So, if the input of Pin 1 was to be RF and Pin 2 Ground....I had Pin 1 as ground and Pin 2 as RF.
Oh well. It's only a 30mm x 90mm piece of copper clad, no big deal.
So, I head to the computer, redraw the design, double check the layout and save the files. Then I had SWMBO (She-who-must-be-obeyed, or XYL in amateur radio terms) look at it to confirm that I was indeed, an idiot. She confirmed that I had a long history of stupidity but ensured me that I was on the right path this time.
Then the CNC woes hit. I probed the height map, which went well, then set out to cut the newly redesigned pieces. When I clicked "send", the CNC crashed. Weird. Let me do that again. Restart the software, re-zero the machine, load up the files, click send *CRASH*. Whiskey-tango-foxtrot!?
In my frustration, I asked the Oracle what to do. Apparently, I had messed up when transitioning from the height map to the actual cut. I restarted the PCB height map, probed zero, started the cut and I was off and running. Cool. The bit was leaving tracks, and the dust was piling, so I took off downstairs to let the shack-hounds go potty outside. Of course, I got sidetracked and came back about 30 minutes later. Low and behold, the CNC is spinning in the air, not making any cuts. Of course, SWMBO comes into the room because of my fit-of-frustration, looks at the CNC, and asks "isn't it supposed be cutting, or are you doing a test run?" Thanks, dear. Love ya. You can leave now.
Back to the spoil-board. I rip off the barely milled piece of copper PCB (Yes, that makes 2 ruined boards at this point for those who are counting) restart the computer, restart the CNC, relaunch the software, and glue down a fresh pice of PCB. (Blue tape and superglue haven't failed me.... yet.). Set the zero, load the G-Code, probe the height of the PC, set the Z-axis to zero, say a little prayer to the Radio Gods and click the send button.
5 minutes in: things are looking good. Copper is being removed, fiberglass is left, and there is plenty of isolation between the pads and tracts. 10 minutes in: Still going well, no biggies. 30 minutes in: Looks like the gremlins are making their appearance. I panelized the board so that I could cut 3 individual boards out of 1 length of copper. The first two are looking good, albeit 2/3 finished, and the 3rd one looks like it's not removing copper from the trace like it should be. I'm thinking that's not going to be an issue, since I only need two but I'm cutting three, so, no biggie. Well, the CNC goes back to cutting the 2nd part of the board and instead of "cutting" the copper, its polishing the top of it. Dag-nabbit! I have broken the tip of the 30degree PCB bit. Oh well. Maybe I can save it. I abort the process, change the bit, and try to go through another PCB height probe. (I should have just ditched the board and started again). Well, it's obviously late at this time, and not paying full attention, I sink the bit about .2mm into the board. THEN I DID SOMETHING DUMB. I moved the X/Y Axis without raising the bit and snapped that bit right off. (For those counting, that's now 3 trashed boards and 2 broken bits.) .... DAMN YOU Mr. Murphy! (Even though it was my fault!)
On that note, I'm off to enjoy a frosty-beverage and then to bed. Maybe I should take the advice of Bill, N2CQR, and sacrifice a chicken to Papa Legba. I will start from scratch on this tomorrow. Maybe I should send a few Hail Mary's in CW, obviously, the Radio Gods are not pleased with me today.
73s
Jason
No comments:
Post a Comment