Wednesday, February 23, 2022

Confessions of a Clueless Radio Amateur

So, why write a blog when there's so many avenues for reaching out:  Facebook, Instagram, YouTube, etc.  I guess I choose to write for the same reason that I became a HAM...I'm drawn to a simpler way.   Don't get me wrong, I love cell phones, smart watches, and technology as much as the next nerd, but there is definitely something magical about analog stuff.  So, whether its amateur radio, guitar amps, or a plain-old pendulum-based clock...color me fascinated with "vintage" technology.  (How can you NOT love the warm orangey glow of vacuum tubes?)

On the other hand, I consider myself to be fairly tech-savvy.   I know how to reinstall an operating system and setup a home network, run servers, configuring certain things to make them work together.  I'm comfortable using "radio appliances" and have successfully revived a busted and tossed-out hybrid tube transceiver from the 70s.  I'm college educated and have a little formal training in electronics theory.  But I also enjoy figuring out how to make stuff work.  I believe Bill (N2CQR) & Pete (N6QW) from Solder Smoke Podcast refer to it as "the knack".   Maybe I have it, maybe I don't, but I'm having fun with it either way.

So, why give you all this back-story?

Well, because I want to build a radio, silly.  I've learned that you can't just start building a radio and be successful.  You got to know the back-story of it.

It started for me when I first listened to the Solder Smoke Podcast shortly after becoming a radio amateur myself in February of 2019.  At first, I wanted flashy screens, computer controls, and several other radio-shaped gadgets.  And, like the sucker-for-a-consumer that I am, I bought them.   My first transceiver was a used Icom IC-7000 that I picked up for a song from a Ham with an expired ticket.   He wasn't using it, and it was collecting dust, so I snatched it for a very fair price.   I had to wait almost a year before I could key the transmitter up, but that's a story for another time.  I finally keyed it up and checked in to a 2m net sometime around February or March of 2020.  From the time I clicked that mic, I was hooked.

I joined the local club (two of them, in fact) and began scrounging the internet for information about how to be a radio amateur.  I soon learned that there is an abundance of media content, several societies and organizations, hundreds of thousands of pages of archives... and a lot of it is hogwash.  They all have their place; it just wasn't the type of information that I was looking for.   But I will begrudgingly admit that it made me a wonderful consumer.  I bought two mobile rigs, a handy-talkie, and another 100W HF radio, plus several accessories in the next several months.

But I wanted more, so I started building kits.  I built two of the Midnight Design Solutions Phaser kits, one for 20m and one for 40m.   Those were fun, but after a contact or two on FT8 for each, I put them on the shelf.  I ordered the QCX + from Hans @ QRP-Labs.  After what seemed like a terrible wait, the kit arrived, and I was excited to build it.   This new rig actually had a VFO that could change frequencies and would be something that I build that I could talk on.

Wait a minute... isn't the QCX + a CW only kit?   Yes.  Yes, it is.   I built it anyway.   But then after it got built, I decided that I needed to learn CW.  So that process took just over a year of my life, but at one point I was comfortable at over 25 wpm...  CW is fun, but you have to stay at it to keep up your skills.

So, I built the kit, and then built two more variants of the QCX (the Mini) when that kit was released.  The first QCX Mini had several issues.  And by several, I mean I had to re-learn how to solder SMD components, and still never got it working correctly.  I ended up ordering a replacement mainboard, and that fixed it.  But I learned A LOT along the way, things that I had forgotten many years ago. 

Then, an older Elmer Friend (Thanks Pat!) offered me a Yaesu FT-101E from a silent key that had been sitting in his barn for several years.  We worked a deal, and I was now the proud owner of that rig and taking a light-speed trip to the bleeding edge of technology in the 1970s.  I cleaned it up, and very cautiously, powered it up.   *POP!!!*.   One of the capacitors in the voltage regular released all of its magic smoke.   They tend to lose their "magic" when you let the smoke out of them.  Over the course of the next couple of months, I rebuilt the voltage regulator board, replaced the main filter caps, powered on the rig, then tested, aligned, and got the whole rig working.  I felt a great sense of accomplishment when it was all working.   The knack was in full swing at that point.

Then I stumbled across the EGV+ from EA3GCY.  This is a neat little QRP CW multi-band kit from Spain.   Of course, I had to order and build one.  I had a blast building this kit too, until I finished it.  I couldn't get the dang thing to hear any decent kind of signal.   So, I dug into the schematic and found that the problem was somewhere in the bandpass filters.   For days, I troubleshot this thing to no avail.  I poked, prodded, probed, measured, and tested every thing I could think of, but it was just deaf.  After a few days of noodling it over in my head, I decided to cave in and re-check every single step of the manual.   Sure enough, I didn't hook the filter selector cable up.   I connected that cable and the receiver came ALIVE!   Boy, I sure felt like an idiot.

I decided to build another kit, this time, a more, what I would call "traditional", kit.  I stumbled upon Chuck Adams', (K7QO) YouTube channel and soon after was the proud owner of a Kits-and-Parts "Organic 5-watter" kit.   This thing was a BLAST to build, and I took Chuck's advice literally; study the schematic and understand what you're doing, then build a section and test it out.  As Pete, N6QW says, "when you know stuff, you can do stuff".   I still don't know a lot, but I'm not afraid to study.   That rig sits on my shelf now... kind of like a trophy to the challenge.   Chuck seems to have disappeared from the amateur radio world for now, and if you're reading this... I don't know where you've disappeared to, but I am forever grateful to your content.  From your organic 5-watter videos to your explanations of circuits, and your awesome guide to using Sprint Layout software, you, and your content are surely missed.  (I wonder if he ever got his WAS on 17M?)

Along the way, I was fascinated with the stuff that Chuck had built.  I'd found his lab notebook, and perused it cover-to-cover.  I fell in love with the technological beauty that is his "MUPPET" style of building.  Coincidentally, that Father's Day, my wife and kids got me a desktop CNC router....and the build-a-radio seed was planted.  I didn't like the idea of working around chemicals, as I've got kids and animals, but I have a wood-shop full of power-tools, so what's the harm in getting a desktop CNC?

Couple that admiration of Chuck's material to the constant absorption of material from the guys at Solder Smoke, the discovery of Nick (M0NTV), Farhan (VU2ESE) and several others I decided that I not only had the drive, but I think I had the necessary skills to build my own transceiver and truly call myself a Radio Amateur.   

These... are my adventures.  

73's

Jason




No comments:

Post a Comment

It BREATHES!

With the antenna amplifier sorted and installed on the board.  I couldn't wait and I held my breath as I connected the antenna input to ...